XCMG Wheel Loader LW800KN
Rated Power/Speed: 250KW/235HP
Max.Rated Lifting Capacity: 8,000KG
Standards Bucket Capacity: 4.5 m³
Operating Weight: 28,500KG
Pilot Control(Y/N): YES
XCMG LW800KN Wheel Loader
1. The imported Cummins QSM11 electronic injection air-air inter-cooled, turbocharged engine with electronic start and stop device and
high torque reserve coefficient enables the whole machine to have powerful traction force and rapid hydraulic response.
2. The low noise and high torque engine and the high capacity torque converter guarantee the maximum efficiency during low speed
traveling to remarkably reduce the fuel consumption.
3. The hydraulic system adopts pilot control, steering flow amplifying, and working and steering confluence technology to realize low
hydraulic power consumption, low energy consumption, and improved efficiency of the hydraulic system.
4. The hydraulic system adopts pilot control, steering flow amplifying, and working and steering confluence technology to realize low
hydraulic power consumption, low energy consumption, and improved efficiency of the hydraulic system.
5. Compliance with environment protection requirements and output of clean emission.
| Description | Unit | Parameter value |
| Rated capacity | kg | 8,000 |
| Bucket volume | 3 m | 4.5 |
| Operating weight | t | 28.5 |
| Forward I / reverse I | km/h | 7/7 |
| Forward II / reverse II | km/h | 11.5/11.5 |
| Forward III/ reverse III | km/h | 24.5/24.5 |
| Forward IV/ reverse IV | km/h | 35 |
| Max. tractive force | kN | 245 |
| Max. climbing gradient | o | >25 |
| Max. dumping angle | o | 45 |
| Max. dumping height | mm | 3,400 |
| Dumping reach | mm | 1,400 |
| Overturn angle of bucket | o | >45 |
| Max. Breakout force | kN | 260 |
| Max excavating depth | mm | 75 |
| Rising time of the boom | s | <7 |
| Total cycling time | s | <12 |
| Min. Turning radius | mm | 6175 |
| Crossing radius | mm | 7460 |
| Turning angle of the frames | o | 40 |
| Oscillating angle of the rear axle | o | ±12 |
