XCMG Wheel Loader LW500KN
Rated Power/Speed: 162KW/217HP
Max.Rated Lifting Capacity: 5,000KG
Standards Bucket Capacity: 3m³
Operating Weight: 17,200KG
Pilot Control(Y/N): OPTIONAL
XCMG LW500KN-T18 front end 5 ton wheel Forklift Loader
LW500KN-T18 stone forklift loader is a special machine developed by XCMG for the operation demands of mining and transport of diversified
stone materials. With design optimization, it's capable of forklifting >18t material (with ground clearance no more than 1,500). The main
features are as below:
1. The Z-shaped link mechanism designed espeially for stone operating cnditions features high breakout force and loading capacity and the
classic double-rocker structure ensures a broad operating view.
2. The extended wheelbase and wheel tread and ultra-high ballast realize good working stability of the machine.
3. The China-lIl engine, high reliability XCMG's electronic control countershaft transmission, and the reinforced dry-type drive axle are
matched perfectly to save the fuel and reduce the consumption.
4. The higher dumping height and dumping distance, extensive rotation angle scope of forks, and adjustable fork spacing are suitable to
diversified operation needs, induding the forklifting and overturning of stones.
5. The 23.5-25 24PR engneering tires are suitable to diversified severe road conditions, featuring powerful off-road performance. The
optional tire chains are at your choice.
6. The high ground clerance,small tuming radius, and high depature angle of the classis can adapt to various complicated operation
conditions.
| Overall 1ength (bucket on the ground) | 8,225 mm |
| Overall width | 2,850 mm |
| Bucket width | 3,016 mm |
| Overall height | 3,515 mm |
| Wheel base | 3,300 mm |
| Tread | 2,250 mm |
| Min. ground clearance | 440 mm |
| Specification | |
| Rated capacity | 5,000 kg |
| Bucket volume | 2.7 m3 (Bucket for rock) 3 m3 (Standard bucket) 3.5 m3 (Bucket for light material) 4 m3 (Bucket for light material) 4.5 m3 (Bucket for light material) |
| Operating weight | 17,200kg±300kg |
| Traveling speeds | |
| ForwardⅠ/Reverse | 6.5/6.5 km/h |
| Forward Ⅱ/Reverse | 11/11 km/h |
| Forward Ⅲ/Reverse | 24/24 km/h |
| Forward/Reverse | 38 km/h |
| Max. tractive force | 165±5kN |
| Max. climbing gradient | 30 º |
| Max. dumping angle | 45 º |
| Max. dumping height | ≥3090 mm (main cutting edge) |
| Dumping reach | ≥1130 mm (main cutting edge) |
| Dumping angle of bucket | ≥45 º |
| Breakout force of bucket | 170 KN |
| Lifting time of boom | ≤6.5 s |
| Total cycling time | ≤11 s |
| Outside of the bucket | 6910 mm |
| Center of the tyre | 5925 mm |
| Turning angle of the chassis | 38 º |
| Oscillating angle of the rear axle | ±12 º |
